POTASSIUM FELDSPAR
INDUCTION
Characterized by a low melting temperature of 1150±20ºC, a lengthy melting phase, and high viscosity in the molten state, potassium feldspar is extensively employed in the production of ceramics, glaze, glass, electrical porcelain, abrasives, and potassium fertilizers.
General industrial specifications:
1.The level of potassium oxide (K2O) should be above 9%, the combined level of magnesium oxide and calcium oxide (MgO+CaO) should be under 2%, and the level of sodium oxide (Na2O) should be less than 3%.
2.For typical ceramics and electrical porcelain, the aluminum oxide (Al2O3) content should be greater than or about 13%.
3.Glass components should have an aluminum oxide (Al2O3) content exceeding 18% and a silicon dioxide (SiO2) content below 70%.
1.Abrasive materials should have a potassium oxide (K2O) content above 10%, a silicon dioxide (SiO2) content above 60%, and an aluminum oxide (Al2O3) content above 18%.
PRODUCT PICTURES
TEST REPORT
| THE SAMPLE OF THE GOODS |
Potash Feldspar |
| Physical Properties |
Chemical Analysis |
| Name of Test |
Result |
Compound |
Result % |
| Shrinkage % |
8.34 |
SiO2 |
70.07 |
| Residue 200# % |
1.28 |
Al2O3 |
15.98 |
| L* |
87.79 |
Fe2O3 |
0.09 |
| a* |
2.42 |
TiO2 |
0.02 |
| b* |
3.12 |
CaO |
0.28 |
| Whiteness |
71.64 |
MgO |
0.1 |
| Temperature C |
1194/1204 |
K2O |
10.56 |
| Cycle Min |
45 |
Na2O |
2.38 |
| |
|
LOSS ON IGNITION |
0.23 |
APPLICATION
1. Ceramic body ingredients: feldspar can play the role of barren raw materials before burning, reduce the drying shrinkage and deformation of the body, improve drying performance and shorten drying time. During firing, it can be used as a flux to reduce the firing temperature, promote the melting of quartz and kaolin, and accelerate the formation of mullite by mutual diffusion and penetration in the liquid phase. The feldspar glass formed in the melting is filled between the mullite grains in the body, which makes the body dense and reduces the void, thus improving its mechanical strength and dielectric properties. In addition, the formation of feldspar glass can also improve the light transmission of the body. The amount of feldspar incorporated in ceramic body varies with different raw materials and different product requirements.
2. Glass flux: feldspar is one of the main components of glass mixture. Feldspar contains high Al2O3, low iron content, and is fusible than alumina, not only the melting temperature is low and the melting range is wide, mainly used to increase the alumina content in glass ingredients, reduce the melting temperature in glass production and increase the alkali content to reduce the amount of alkali. In addition, the process of feldspar melting into glass is relatively slow, and the crystallization capacity is small, which can prevent the crystallization of crystals during the formation of glass and destroy the product. Feldspar can also be used to regulate the viscosity of glass. Generally all kinds of glass mix with potassium feldspar or albite.
3. Ceramic glaze: Ceramic glaze is mainly composed of feldspar, quartz and clay raw materials, of which feldspar content can reach 10-35%. In the ceramic industry (billets and glazes) potassium feldspar is mainly used.
4. Enamel raw materials: mainly mixed with feldspar and other mineral raw materials. The inclusion of feldspar is usually 20-30%.
5. Agriculture: potassium feldspar can be used as a raw material for extracting potash fertilizer.
COMPANY PROFILE
Amanda (Liaoning) International Trade Co., Ltd. was formerly known as Jin Run Hao Mineral Products Co. The company was established in early 2018, is an integrated company engaged in mineral products processing, foreign trade sales. The main products of the company are ceramic materials, construction materials and refractory materials. The company adopts international advanced processing and photoelectric integration classification technology equipment, in order to ensure accurate quality control and meet the needs of customers. Our company has a technical R&D team to adjust the quality requirements for the special needs of different customers. In the complex international intermodal transportation, we have signed first-class agency contracts with many shipping companies and railroad companies in many ports to provide customers with low-cost and time-efficient transportation solutions. Each product of our "AMANDA" brand has its own advantages and is suitable for different industries. Our products are exported to India, Russia, Turkey, Vietnam, Korea, Indonesia, Bangladesh and other Southeast Asian and European countries. Our products are well received by our customers and we have established a long-term cooperation partnership.
Facing the fierce market competition, Amanda people insist on the tenet of market-oriented, customer-oriented and credit-oriented, and strive to become an international enterprise with outstanding quality, trustworthiness and social responsibility.
PRODUCING & PACKING
FAQ
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:How about the price and quanlity?
A:We provide ex-factory price, good quality, all indicators of stable products.
Q:How many years of experience in supply?
A:Our company has a professional trade team, serving in the trade industry for nearly 20 years, we can provide good service and stable quality products.
Q:Do you accept customization?
A:We could like to give you suitable suggestion about Fritted according to your detail application.
Audited Supplier 
){kind=link}